Posted by Sallie Velazquez at Tuesday, December 01st, 2020 - 01:37:54 AM in Power Tools
Never use bent, broken, or warped blades or cutters. In addition, the work area should be well lit and clean. Instruction manuals must be followed when lubricating power tools and changing tool accessories. Strong footing and good balance should be maintained when using power tools, and non-slip footwear is recommended. Avoid loose clothing, ties, jewelry, or anything else that could potentially become caught in a power equipment moving parts. Long hair must be tied back. Individuals who use power tools are exposed to the inherent dangers of falling, flying, abrasive, and splashing objects, or to harmful dusts, fumes, mists, vapors or gases. Therefore, safety glasses or goggles with side shields must be worn to protect the eyes against these flying particles. Use a dust mask for dusty operations and hearing protection if you will be using the tool for an extended period of time. Power equipments should be stored when not in use so as to not cause accidental injury. Be sure to dispose of damaged power tools, or clearly label them as damaged.
Just what qualities are you looking for in a specific power tool? Do not get caught up in all the features that one may give. You might end up paying a great deal more for one which includes features you do not expect to ever use. Take a close look at those features though because you will possibly find a couple you are able to really employ that you didn't think of. That could certainly make a specific model more appealing to you.
Do some research and set a budget. Spending too much and spending too little are common missteps in finding the best power tool, and its definitely an easy mistake to make; if you have a limit already in mind, you're much more likely to stick to it. It is important to remember though, that cheap and expensive power tools are cheap and expensive for a reason. The expression "you get what you pay for," is perhaps at its most true in the tool industry.
My recommendation is to give serious thought to how external elements might affect your project. And adjusting your project time to a more favorable season…may be a good decision…”JUST DO IT”, may not be the best phrase in this type of endeavor. Getting started on a project at the wrong time might hamper on entirely hinder your efforts and put a negative spin on other projects you might want to personally do.
Power equipment should not be carried by their cord or hose. Do not yank the cord or hose to disconnect it from a receptacle. If the tool has a three-prong plug, it should be plugged into a three-hold electrical receptacle. If an adapter is used to use a two-prong receptacle, the adapter wire must be attached to a known ground. If you are using an extension cord, make sure it is a heavy duty cord, and do not use indoor rated cords outside. Cords and hoses should be kept away from oil, heat, and sharp edges. When tools are not being used, they should be disconnected, whether they are being stored, being serviced, cleaned, or when accessories are being changed. Individuals not using the power tool should keep a safe distance from the work area to avoid getting hit by flying particles. Use clamps or a vise to secure the project so that both hands are free to operate the tool. Do not hold fingers on the power switch when carrying around a tool. Cutters and blades should be kept sharp, clean, and properly maintained for their best and safest performance.